Water Pump Automation System

PRODUCT FEATURE :

• 3 Phase Digital Water Level Controller with DOL Starter  Input: R,Y,B Output: R, Y, B motor.
• High low voltage protection, OL and Dry run protection.  
• Cyclic timer, On and Off delay timer Adjustable.  
• Dry run rest time provided, Current based dry run protection.  
• SPP provided to protect from phase failure and reverse phase.  
• Auto switch provided, Power goes and comes motor start.  
• Auto manual switch provided, protection bypass facility.  
• 2 separate display for Digital Volt and Amp meter.  
• Suitable up to 10 hp Motor.  
• Load capacity 40 A, 415 VAC.  
• Sensor fault detection provided. 
• Sensing element : 6 no S.S sensors.  
• Electrolysis free design 
• ABS Body.

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Silent Feature :

• Suitable for 3 phase motor and submersible pump.
• Suitable for any 3 phase starter panel. Suitable for motor up to 10 HP. 
• Can connect without starter panel.
• Visual Indication for Power and Motor ON & OFF.
• Long service Life, Easy Installation, Sturdy Construction, Efficient operation.

Working :

• This model automatically switches ON and OFF the Motor.
• When the water level of the overhead tank becomes low means water gets down from the middle sensor and if water is present in the underground tank or sump, the motor gets started automatically. The tank starts filling up. when the water level reaches to the higher level, the motor automatically gets switched off.
• Auto OFF when tank is full or Sump is Empty.

Application :

• Applicable to underground tank, overhead tank, pressure pump, tube well and deep boring. Automatic water 
• level controller is of much used in like Useful at: Homes, Bungalows, Apartments, Commercial complexes, Hotels, School, Colleges, Hospitals, Residential Colonies and Industries etc. use of this product Saves Water, Saves Electricity, Saves Times and Saves Man Power. Helps in preventing overflow of water from the Overhead tank.

PRODUCT FEATURE :

• Digital Water Level Controller single phase  Run Capacitor provided 50 MFD 
• Input: P (Phase), N (Neutral), Output: R, Y, B motor 
• High low voltage protection, OL and Dry run protection  
• Cyclic timer, On and Off delay timer Adjustable  
• Dry run rest time provided  
• Auto switch provided, Current based dry run protection  
• Auto manual switch provided, protection bypass facility  
• 2 separate display for Digital Volt and Amp meter  Suitable up to 1.5 hp Motor,  
• Load capacity 40 A, 240 VAC  
• Sensor fault detection provided  
• Sensing element : 6 no S.S sensors  
• Electrolysis free design, 
• ABS Body

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Silent Feature :

• Suitable for Single phase motor and submersible pump.
• Suitable for any Single phase starter panel. Suitable for motor up to 1.5 HP. 
• Can connect without starter panel.
• Visual Indication for Power and Motor ON & OFF.
• Long service Life, Easy Installation, Sturdy Construction, Efficient operation.

Working :

• This model automatically switches ON and OFF the Motor.
• When the water level of the overhead tank becomes low means water gets down from the middle sensor and if water is present in the underground tank or sump, the motor gets started automatically. The tank starts filling up. when the water level reaches to the higher level, the motor automatically gets switched off.
• Auto OFF when tank is full or Sump is Empty. 

Application :

• Applicable to underground tank, overhead tank, pressure pump, tube well and deep boring. Automatic water 
• level controller is of much used in like Useful at: Homes, Bungalows, Apartments, Commercial complexes, Hotels, School, Colleges, Hospitals, Residential Colonies and Industries etc. use of this product Saves Water, Saves Electricity, Saves Times and Saves Man Power. Helps in preventing overflow of water from the Overhead tank.

PRODUCT FEATURE :

• This model is suitable to single phase push button starter, fully automatic for both tank  Suitable any HP single phase.  
• Dry run protection, 
• Auto and manual mode provided  
• Sensor fault detection provided  
• Sensing element : 6 no S.S sensor 
• Electrolysis free design, 
• Metal Body

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Silent Feature :

• Suitable for single phase motor up to 5 HP.
• Also suitable for single phase MCB starter panel, submersible motor.
• Can connect with and without starter panel.
• Suitable for Single Phase any type of Push Button Starter Panel.
• Visual Indication for Power and Motor ON & OFF.
• Long service Life, Easy Installation, Sturdy Construction, Efficient operation.

Working :

• When the water level of overhead tank becomes low means water get down from middle sensor and if water is present in the underground tank, motor get start automatically.
• The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. The motor automatically gets switched off.
• No Man Power required
• Protect motor from dry running. Auto off when tank is full or sum is empty.
• Auto / Manual / Bypass / Fuze Switch available.  

Application : Applicable to underground tank, overhead tank, pressure pump, tube well and deep boring.Automatic water level controller is of much used in like Useful at: Homes, Bungalows, Apartments, Commercial complexes, Hotels, School, Colleges, Hospitals, Residential Colonies and Industries etc. use of this product Saves Water, Saves Electricity, Saves Times and Saves Man Power. Helps in preventing overflow of water from the Overhead tank.

PRODUCT FEATURE :

• This model is suitable to single phase push button starter, fully automatic for both tank  Suitable any single phase Motor up to 5 HP  
• Dry run protection,  
• Load capacity 40 A 2 relay, 240 VAC 
• Auto and manual mode provided  
• Sensor fault detection provided 
• Sensing element : 6 no S.S sensor  
• Electrolysis free design, 
• ABS Body

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Silent Feature :

• Suitable for single phase motor up to 5 HP.
• Also suitable for single phase MCB starter panel, submersible motor.
• Can connect with and without starter panel.
• Suitable for Single Phase any type of Push Button Starter Panel.
• Visual Indication for Power and Motor ON & OFF.
• Long service Life, Easy Installation, Sturdy Construction, Efficient operation.

Working :

• When the water level of overhead tank becomes low means water get down from middle sensor and if water is present in the underground tank, motor get start automatically.
• The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. The motor automatically gets switched off.
• No Man Power required
• Protect motor from dry running. Auto off when tank is full or sum is empty.
• Auto / Manual / Bypass / Fuze Switch available.  

Application : Applicable to underground tank, overhead tank, pressure pump, tube well and deep boring. Automatic water level controller is of much used in like Useful at: Homes, Bungalows, Apartments, Commercial complexes, Hotels, School, Colleges, Hospitals, Residential Colonies and Industries etc. use of this product Saves Water,Saves Electricity, Saves Times and Saves Man Power. Helps in preventing overflow of water from the Overhead tank.

PRODUCT FEATURE :

• Micro controller based Fully Automatic Water Level Controller and Indicators For Up and Down Tank  Suitable to any hp motor as no load comes on it.  
• It can connect to any three phase starter. 
• Dry run protection, It having 6 sensors.  
• Auto and manual mode indication provided.  
• Sensor fault detection provided.  
• Sensing element : S.S sensor.  
• Electrolysis free design.
• Metal Body.

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Silent Feature :

• Suitable for 3 phase motor and submersible pump.
• Suitable for any 3 phase starter panel. Suitable for motor up to 100 HP. 
• Can connect with and without starter panel.
• Visual Indication for Power and Motor ON & OFF.
• Long service Life, Easy Installation, Sturdy Construction, Efficient operation.

Working :

• When the water level of overhead tank becomes low means water get down from middle sensor and if water is present in the underground tank, motor get start automatically.
• The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. The motor automatically gets switched off.
• No Man Power required
• Protect motor from dry running. Auto off when tank is full or sum is empty.
• Auto / Manual / Bypass / Fuze Switch available.  

Application :

• Applicable to underground tank, overhead tank, pressure pump, tube well and deep boring.
• Automatic water level controller is of much used in like Useful at: Homes, Bungalows, Apartments, Commercial complexes, Hotels, School, Colleges, Hospitals, Residential Colonies and Industries etc. use of this product Saves Water, Saves Electricity, Saves Times and Saves Man Power. Helps in preventing overflow of water from the Overhead tank.

PRODUCT FEATURE :

• Micro controller based Fully Automatic Water Level Controller and Indicators For Up and Down Tank  Suitable for 0.1 HP to 5.0 HP Motor
• Dry run protection,
• Load capacity 40 A, 240 VAC
• Auto and manual mode provided
• Sensor fault detection provided
• Suitable for MCB Starter panel
• Sensing element : S.S sensor, It having 6 sensors
• Electrolysis free design, 
• Metal Body

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Silent Feature :

• Suitable for single phase motor up to 5 HP.
• Also suitable for single phase MCB starter panel, submersible motor.
• Can connect with and without starter panel.
• Suitable for Single Phase any type of Push Button Starter Panel.
• Visual Indication for Power and Motor ON & OFF.
• Long service Life, Easy Installation, Sturdy Construction, Efficient operation.

Working :

• When the water level of overhead tank becomes low means water get down from middle sensor and if water is present in the underground tank, motor get start automatically.
• The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. The motor automatically gets switched off.
• No Man Power required
• Protect motor from dry running. Auto off when tank is full or sum is empty.
• Auto / Manual / Bypass / Fuze Switch available.  

Application : Applicable to underground tank, overhead tank, pressure pump, tube well and deep boring. Automatic water level controller is of much used in like Useful at: Homes, Bungalows, Apartments, Commercial complexes, Hotels, School, Colleges, Hospitals, Residential Colonies and Industries etc. use of this product Saves Water, Saves Electricity, Saves Times and Saves Man Power. Helps in preventing overflow of water from the Overhead tank.

PRODUCT FEATURE :

• Single phase fully automatic water level controller and indicator for single tank.  
• Suitable for single phase motor up to 2 HP
• Provided 3 sensors
• Auto bypass facility
• Sensor fault detection provided
• Motor ON indication provided
• ABS White Enclosure

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details.

Silent Feature :

• Suitable for single phase motor up to 2 HP.
• Suitable for Single Phase any type of Push Button Starter Panel.
• Visual Indication for Power and Motor ON & OFF.
• Long service Life, Easy Installation, Sturdy Construction, Efficient operation.

Working :

• When the water level in the tank become low, means water get down from middle sensor, motor get switch on automatically,
• The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. The motor automatically gets switched off.
• No Man power is required.

Application :

Automatic water level controller is of much used in like Useful at: Homes, Bungalows, Apartments, Commercial complexes, Hotels, School, Colleges, Hospitals, Residential Colonies and Industries etc use of this product Saves Water, Saves Electricity, Saves Times and Saves Man Power. Helps in preventing overflow of water from the Overhead tank.

Package Contains : 1 Water Level Controller unit, 3nos Sensors, 1 user Manual, 1 pack Mounting screw, 1 warranty Card.

PRODUCT FEATURE :

• Manual Start and Auto Stop water level controller.  
• Suitable for single phase motor up to 5 HP 
• 2 no Carbon sensors  
• Tank level indication and power indication  
• Load capacity 40 A, 240 VAC

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Silent Feature :

• Suitable for single phase motor up to 5 HP.
• Suitable for Single Phase any type of Starter Panel.
• Long service Life, Easy Installation, Sturdy Construction, Efficient operation.

Working :

• When the water level in the tank become low, means Manually start, motor get switch on automatically,
• The tank starts filling up. When the water level reaches to the higher level, the top level sensor sense. The motor automatically gets switched off.
• Man power is required.

Application : Automatic water level controller is of much used in like Useful at: Homes, Bungalows, Apartments, Commercial complexes, Hotels, School, Colleges, Hospitals, Residential Colonies and Industries etc. use of this product Saves Water, Saves Electricity, Saves Times and Saves Man Power. Helps in preventing overflow of water from the Overhead tank.

PRODUCT FEATURE :

• Water level indicator to indicate 6 deferent level of tank  LED indication provided. 
• 7 no of sensors included. 
• Buzzer provided when tank full and empty.  
• Sensor fault detection provided.  
• Power LED Showing.
• Electrolysis free design.
• ABS Body.

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Package Contain : 

• 1 Water Level Indicator Unit.
• 7 S S  Sensors.
• 1 user manual with technical details.