Water Pump Automatic Sensor

PRODUCT FEATURE :

• When the water comes in the municipal line it will start the motor and stop the motor when upper tank full.  Only start the motor if water is in the municipal line.  
• T sensor and 3 no S.S sensor provided.  
• Suitable for 0.1 HP to 5.0 HP Motor.  
• Load capacity 40 A, 240 VAC. 
• Auto and manual mode indication provided. 
• Sensor fault detection provided. 
• Electrolysis free design.
• ABS Body

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

HOW AUTOMATIC WATER LEVEL CONTROLLER WORKS

• This controller will start the motor when water comes in the T sensors, and stop the motor when the upper tank is full. useful to protect the motor from dry running. .
• As shown in the diagram, out of three sensors, 1 sensor put at the bottom, 1 sensor put at the middle, and 1 sensor at the top level of the tank. Place the T sensor in the municipal supply line as shown in the diagram.
• When the water level of the overhead tank becomes low means water gets down from the middle sensor and water is present in the T-Sensor, the motor gets started automatically. The tank starts filling up. when the water level reaches to the higher level, the motor automatically gets switched off.

AUTO OFF WHEN TANK IS FULL OR NO WATER IN T SENSOR.

• If users want to start their motor, when government water comes to the municipal line, then they need to put this sensor at the water supply line. So when government water comes, T - sensor (Line sensor) will sense the water and send commands to the water level controller to start the motor. If water does not come, the motor will not start.
• Suitable for 0.1 HP to 5.0 HP Motor, Protect motor from dry running.
• Motor ON OFF LED indication provided.
• Water Level indication provided for both tanks.
• Sensing element : S S sensor, it is free from oxidation, long life. Any conducting wire can be used for the sensor.
• Auto and Manual mode switch available. In auto mode the motor starts and stops automatically. In manual mode the user can start and stop the motor by pressing the start and stop button of the controller. No additional wiring is required to operate the motor manually. 

PRODUCT FEATURE :

• It is high quality carbon sensor.  Pure carbon, no impurities, free from oxidation, long life.  
• 10 inches wire provided and it can be extended with
• other ordinary wire.  
• ABS plastic cover cap provided.  
• Carbon pin molded within Polypropylene.
• Plastic Cover.  
• Suitable to all Type of water controller.
• indicator  Electrolysis free design

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Product Descriptions :

• It is high quality carbon sensor. 
• Pure carbon, no impurities, free from oxidation, long life.
• 10 inches wire provided and it can be extended with other ordinary wire.
• ABS plastic cover cap provided
• carbon pin molded within Polypropylene
• Suitable to all water level controller and water level indicator
• Sensors work on law of conductivity, there is no current passes through sensors. 

PRODUCT FEATURE :

• It is high quality carbon sensor.  Pure carbon, no impurities, free from oxidation, long life.  
• 2.5 meter wire provided and it can be extended with 
• other ordinary wire.  
• Plastic Cover
• ABS plastic cover cap provided.
• Carbon pin molded within Polypropylene.  
• Suitable to all type of water Level controller.
• Electrolysis free design.

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Product Descriptions :

• It is high quality carbon sensor. 
• Pure carbon, no impurities, free from oxidation, long life.
• 2.5 meter wire provided and it can be extended with other ordinary wire.
• ABS plastic cover cap provided
• carbon pin molded within Polypropylene
• Suitable to all water level controller and water level indicator
• Sensors work on law of conductivity, there is no current passes through sensors. 

PRODUCT FEATURE :

• It is high quality stainless steel (SS 304) sensor.  Pure stainless steel, no impurities, free from oxidation. 
• long life.  S.S. screw provided for wire connection. 
• ABS plastic cover cap provided.  
• S.S. pin molded within Polypropylene
• Suitable to all type  of water controller.
• Plastic Cover. 

Product Descriptions :

• It is high quality stainless steel  (SS 304) sensor. 
• Pure stainless steel, no impurities, free from oxidation, long life.
• S.S. screw provided for wire connection
• ABS plastic cover cap provided
• S.S. pin molded within Polypropylene
• Suitable to all water level controller and water level indicator
• Sensors work on law of conductivity, there is no current passes through sensors. 

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

PRODUCT FEATURE :

• It control motor directly as well as can connect with water level controller.  2.Rated voltage: 220 to 270 V AC. 
• Water proof plastic body. 
• Rust proof (entire sensor body in polypropylene). 
• It can be also used in hard water or fuel such as diesel.
• kerosene, oil etc 

Warranty Service : 

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Package Contain : 

• 1 Float Switch.
• 1 counter weight with gland.
• 1 user manual with technical details.

Product Descriptions :

• A float switch is a device used to detect liquid level of tank. 
• It is used to control motor automatically.
• It control motor directy as well as can connect with water level controller.
• If it connect with water level controller then suitable up to 100 HP Motor. If connect directly then 10 A capacity. 

PRODUCT FEATURE :

• Two S.S Sensor Mounted on pipe.  It uses with water level controller to detect water in. 
• sump.  suitable to any water level controller. 
• There are two types of applications.  
• 1 if you want to start motor when water comes in to sensor then it require any underground tank controller.  
• 2 if you want to stop motor when water comes in to sensor then it require any overhead tank controller.
• Electrolysis free design.

Warranty Service :

• Repair or Replacement.
• 1 Automation unit. 
• 1 user manual with technical details

Product Descriptions :

• Line sensor generally connect at sump. It can connect with any types of water level controller.
• If water is present in line sensor then water level controller will start motor. If water is not present then motor will not start.
• If user want to start their motor, only if government water come to the sump, then they need to put this sensor at water supply line. so when government water comes, T - sensor (Line sensor) will sense the water and send command to the water level controller to start the motor. If water not comes motor not start.

Product description  : Sensing element : S.S Sensor. free from oxidation long life.

Applications :

• It uses with water level controller to detect water in sump. 
• Suitable to any water level controller. 

There are two types of applications 

• 1 if you want to start motor when water comes in t sensor then it require any underground tank controller.
• 2 if you want to stop motor when water comes in t sensor then it require any overhead tank controller.